York – HMCG2 Horizontal Discharge Inverter Air Conditioner | R-410A | Toronto & GTA Installation Included
York – HMCG2 Horizontal Discharge Inverter Air Conditioner | R-410A | Toronto & GTA Installation Included
The York HMCG2 is a horizontal-discharge inverter air conditioner built for homes where space, noise, and clearance matter. With a footprint up to 40% smaller than a traditional vertical-discharge condenser, the HMCG2 fits zero-lot-line properties, narrow side yards, decks, and multi-family installations where standard units simply will not go. Each Bison Air installation includes a new properly matched evaporator coil to ensure correct airflow, efficiency, and long-term system reliability. Inverter-drive technology delivers smooth, variable-capacity operation between 35% and 100%, holding precise indoor temperatures while keeping energy bills and operating sound low. Available in 2, 3, 4, and 5 ton models with up to 18.5 SEER2 efficiency.
Why Choose the York HMCG2 Horizontal Discharge AC
- 40% smaller footprint than traditional vertical-discharge condensers — installs in tight side yards, under decks, and zero-lot-line properties
- Only 8 inches of clearance required from exterior walls (vs. up to 24 inches for vertical units)
- Inverter-drive technology ramps smoothly and modulates between 35–100% capacity for precise comfort and lower energy use
- Operating sound as low as 54 dBA — about as quiet as a typical dishwasher, 36% quieter than standard units
- Up to 18.5 SEER2 efficiency on the 5-ton model
- Long line set capability up to 246 ft — flexible placement for difficult installations
- Works with standard AC thermostats and conventional indoor equipment — no specialty controls required
- ETL safety certified and AHRI 210/240 performance certified
Who Is This Air Conditioner For
The HMCG2 is the right choice when a traditional vertical AC will not fit or will not work. Common scenarios include:
- Homes on narrow lots or zero-lot-line properties where setback clearances are tight
- Side-yard installations where only 8–12 inches of clearance is available
- Properties where the condenser must be installed under a deck or in a recessed alcove
- Multi-family, semi-detached, and townhouse installations
- Long line set runs where indoor and outdoor units are separated by significant distance (up to 246 ft)
- Homeowners who want quieter operation than a standard single-stage AC
What's Included With Your Installation
- York HMCG2 horizontal discharge outdoor condenser unit
- New properly matched evaporator coil
- Up to 25 feet of refrigerant line set
- Refrigerant connections and full system charging
- Condensate drain connection
- Electrical connection to existing disconnect
- System startup, commissioning, and performance verification
- Removal and disposal of your old AC condenser
- Permit and TSSA documentation where required
Technical Specifications
| Model | Tons | SEER2 | Height | Width | Depth | Weight |
|---|---|---|---|---|---|---|
| HMCG22B241S | 2 | 18.0 | 26 3/8" | 33 7/8" | 12 1/4" | 99 lbs |
| HMCG22B361S | 3 | 17.0 | 29 1/2" | 35 3/8" | 13 3/8" | 117 lbs |
| HMCG22B481S | 4 | 16.5 | 54 5/8" | 37 3/8" | 13 3/8" | 206 lbs |
| HMCG22B601S | 5 | 18.5 | 54 5/8" | 37 3/8" | 13 3/8" | 207 lbs |
Key Features
- Inverter-driven variable-capacity compressor (35–100%)
- Innovative low-vibration fan design for quieter operation
- Compact horizontal discharge cabinet
- Compatible with York variable-speed and standard ECM indoor air handling equipment
- Works with conventional 24V AC thermostats
- Long line set capability up to 246 feet
- ETL safety certified
- AHRI 210/240 performance certified
- Good Housekeeping Seal of approval
Warranty
10-Year Parts Limited Warranty — when registered online within 90 days of installation
2-Year Parts Warranty on all genuine York parts
Optional 10-Year Labour Extension available for $700
Failure to register within 90 days defaults to the standard 5-year parts warranty. Bison Air handles all warranty registration on your behalf.
Why Choose Bison Air
- TSSA Certified HVAC Contractor
- Fully Licensed & Insured HVAC Technicians
- Standard Installation Included — No Hidden Fees
- Professional System Design & Equipment Selection
- Clean, Organized Installations
- Financing Available — Pre-qualify in Seconds
- Serving Toronto, York Region, Peel Region, Barrie & all GTA Communities
Financing Available
Apply for financing up to $100,000 through Financeit. No obligation, no commitment, pre-approval in seconds. Make your installation affordable with flexible monthly or biweekly payment plans. Learn more about HVAC financing →
⚠️ Important Notes: Standard installation includes new evaporator coil, up to 25 feet of refrigerant line set, and refrigerant connections. Final price may vary depending on furnace compatibility, electrical work, or site conditions.
Related Services
- HVAC Installation Toronto & GTA
- HVAC Services Toronto & GTA
- What is the SEER Rating in an Air Conditioner
- HVAC Financing Toronto
- Contact Bison Air
Areas We Serve
Request an Air Conditioner Consultation
Our HVAC specialists will confirm proper AC size, compatibility, and installation requirements for your home.
You have a Budget. We have a payment plan to match it.
Apply for financing up to $100,000. Find out if you pre-qualify in second. No obligation, no commitment and make your large purchase more affordable by applying for an easy monthly or biweekly payment plan whit Financeit. Get pre-approved in seconds!
