Mitsubishi – Mr. Slim FX Series Wall Mount Cold Climate Hyper Heat Plus | R-454B | Toronto & GTA Installation Included

$5,600.00
👉 Flexible financing available

Size

The Mitsubishi Mr. Slim FX Series is the most advanced wall mount heat pump in the Mr. Slim lineup — built for Canadian homeowners who refuse to compromise on cold climate performance or energy efficiency. Powered by Mitsubishi's H2i SUMO™ Hyper-Heating Inverter technology, the FX Series delivers reliable heating with outdoor unit operation down to -36.7°C (-34°F) — the deepest cold climate rating available in residential ductless. It also includes the 3D i-see Sensor®, Dual Barrier Fusion anti-contaminant coating, triple-action filtration, and built-in Wi-Fi — all standard. Available in six sizes from 6,000 to 20,800 BTU. Price includes standard professional installation and up to 20 ft of lineset.

❄️
Operates to -36.7°C — Deepest Cold Climate Rating Available
H2i SUMO™ Hyper-Heating Inverter technology — the most powerful cold climate compressor in the Mr. Slim residential lineup. Designed specifically for Canadian winters.
💡 FX Series vs GX Series — How They Compare
Feature FX Series (This Page — Premium) GX Series (Standard)
Cold Climate Rating Operates to -36.7°C (-34°F) Heats to -25°C (-14°F)
Max SEER2 Up to 35.0 Up to 28.4
Max HSPF2 Up to 12.1 Up to 10.7
Built-in Wi-Fi ✅ Yes — Comfort App ✅ Yes — Comfort App
3D i-see Sensor® ✅ Built-in — room scanning, occupancy sensing ❌ Not included
Dual Barrier Fusion ✅ Vanes + heat exchanger — stays cleaner longer Coating on heat exchanger only
BTU Range 6K–24K BTU 9K–36K BTU
Best For Maximum cold climate performance, highest efficiency, smartest comfort Reliable everyday comfort — wider BTU range, lower price point

If -36.7°C performance and top-tier efficiency matter — the FX is the right choice. For larger rooms up to 36K BTU or a lower price point, the GX delivers. Contact Bison Air for guidance.

📦 What's Included
  • Mitsubishi MSZ-FX Series wall mount indoor air handler — as selected
  • Mitsubishi MUZ-FX Series H2i SUMO™ Hyper-Heating inverter outdoor unit — matched to BTU size
  • Wireless remote controller (included)
  • Built-in Wi-Fi — Mitsubishi Comfort App ready, no adapter needed
  • Professional installation by TSSA Certified technicians
  • Up to 20 ft of lineset included — longer runs quoted separately
  • System startup, vacuum, leak test, and commissioning
  • Mitsubishi product registration (required for 10-year warranty)
⚡ Key Features
  • H2i SUMO™ Hyper-Heating Inverter Technology — Mitsubishi's most powerful cold climate compressor. Maintains strong heating output with outdoor unit operation down to -36.7°C (-34°F)
  • Up to 35 SEER2 / 12.1 HSPF2 — Among the highest efficiency ratings available in the residential ductless category
  • 3D i-see Sensor® (Built-in) — Advanced infrared sensor scans the entire room in three dimensions, detects occupants, and automatically adjusts temperature and airflow for personalized comfort — reduces output when room is unoccupied
  • Dual Barrier Fusion — Anti-contaminant treatment fused directly into the material of the vanes AND heat exchanger — keeps the indoor unit cleaner longer with significantly less maintenance required
  • Built-In Wi-Fi — Comfort App Ready — Factory-installed Wi-Fi, pairs directly with the Mitsubishi Comfort App. No external adapter required
  • Triple-Action Filtration — Nano Platinum filter, deodorizing filter, and electrostatic anti-allergy enzyme filter capture particles, eliminate odours, and neutralize allergens
  • R-454B Refrigerant — Low global warming potential, next-generation refrigerant
  • Hot-Start Technology — Fan delays until heat exchanger is warm, eliminating cold air blasts at startup or after defrost
  • Blue Fin Coating on Outdoor Unit — Anti-corrosion treatment on heat exchanger fins for durability in urban and coastal environments
  • Whisper-Quiet Operation — As low as 19 dB(A) indoors
📐 Technical Specifications
Spec 6K 9K 12K 15K 18K 24K
IDU Model FX06NL-CA1 FX09NL-CA1 FX12NL-CA1 FX15NL-CA1 FX18NL-CA1 FX24NL-CA1
ODU Model FX06NLHZ2-CA1 FX09NLHZ2-CA1 FX12NLHZ2-CA1 FX15NLHZ2-CA1 FX18NLHZ2-CA1 FX24NLHZ2-CA1
Cooling BTU/h 6000 9000 12000 15000 17200 20800
Heating BTU/h 9000 12000 13200 16500 17000 19800
SEER2 35.0 33.1 29.9 25.9 25.5 23.5
HSPF2 11.0 12.1 12.0 10.1 10.6 10.4
EER2 21.45 18.35 15.4 14.7 13.05 13.35
Line Set 1/4" × 3/8" 1/4" × 1/2" 1/4" × 5/8"
Min. Op. Temp -36.7°C (-34°F) — H2i SUMO™ Hyper-Heating
Wi-Fi Built-in — Comfort App, no adapter needed
3D i-see Sensor Built-in
Refrigerant R-454B
Electrical 208-230V / 1-Phase / 60Hz
📏 Indoor Unit Dimensions
Mitsubishi MSZ-FX Series Wall Mount Heat Pump Indoor Unit Dimensions

All six FX Series BTU sizes share the same indoor cabinet — no size variation to plan around. Always confirm clearance requirements with your installer.

🏠 Recommended Room Size
BTU Recommended Application
6K Very small rooms, dens, home offices (up to ~300 sq ft)
9K Small bedrooms, offices (up to ~450 sq ft)
12K Bedrooms, offices (~550–700 sq ft)
15K Medium rooms, master bedrooms (~700–900 sq ft)
18K Living areas, open-concept spaces (~800–1100 sq ft)
24K Large living areas, open-concept (~1100–1400 sq ft)

Sizing is a guideline. Contact Bison Air for a proper load calculation.

🛡️ Warranty Coverage
  • 10-Year Parts & Compressor Warranty — Mitsubishi manufacturer warranty on registered equipment
  • 1-Year Bison Air Labour Warranty — Covers installation workmanship
  • Optional 10-Year Labour Extension — Available for $700 — ask at time of installation

Product registration with Mitsubishi is required to activate the 10-year warranty. Bison Air handles registration at the time of installation.

⭐ Why Choose Bison Air
  • TSSA Certified HVAC Contractor
  • Fully Licensed & Insured HVAC Technicians
  • Registered HRSP Heat Pump Rebate Contractor
  • Standard Installation Included — No Hidden Fees
  • Up to 20 ft Lineset Included
  • Professional System Design & Equipment Selection
  • Clean, Organized Installations
  • Financing Available — Pre-qualify in seconds
💰 Heat Pump Rebates & Financing

This system may qualify for Ontario government heat pump rebate programs. Bison Air is a Registered HRSP Rebate Contractor — we handle the paperwork.

  • Up to $7,500 in available rebates
  • Financing available — pre-qualify in seconds, no upfront payment

👉 Heat Pump Rebates — Toronto & GTA
👉 Step-by-Step Ontario Rebate Guide
👉 HVAC Financing Options

Ready to Install? Contact Bison Air Today
Select your BTU size and schedule your installation.
📞 Call 416-652-4323
  Special Financing + Special Offers

You have a Budget.  We have a payment plan to match it.

Apply for financing up to $100,000. Find out if you pre-qualify in second. No obligation, no commitment and make your large purchase more affordable by applying for an easy monthly or biweekly payment plan whit Financeit. Get pre-approved in seconds!

Pre-qualification wont affect your credit score